Educational laboratories · Preschool education · Primary school · Electrical engineering · Ministry of Industry and Trade register
The Electronics for Young Geniuses learning kit introduces children aged five and up to electricity, electrical engineering, and electronics. Learners build circuits on a specially designed assembly board. Preschool and primary school children can explore the fundamentals by putting together different circuits without soldering. Wires connect the parts: contacts at the ends of the wires fit into springs, with the electronic components attached to the other side. This provides a reliable connection without soldering. The kit was developed in line with recommendations for equipping preschool and primary education organisations and providing teaching materials for their programmes.
- Register
The kit is listed in the Russian Ministry of Industry and Trade register under No. 10521631.
- Age
5 years and up
Description and specifications
The kit can be used with the 20-lesson Fundamentals of Electrical Engineering, Electronics, and Electricity course (in Russian). It is listed as compliant with paragraph 2.1.41 of Russian Ministry of Education Order No. 838, dated 28 November 2024. See the Russian-language equipment list.
Learning with the assembly board
The Electronics for Young Geniuses kit teaches the basics of electricity and electrical engineering through safe, solder-free circuit building. The assembly board makes it easier to put circuits together and test them. To connect a circuit, lift a spring and insert a wire terminal. This connection is convenient, safe, and easy for children to understand.
Learning takes place through play. Electronic components such as resistors, capacitors, and transistors are presented as friendly characters who help the main character, Terry the Hedgehog. Solar cells and inductors are included for building a wider range of circuits. Components are protected inside the table base to prevent mechanical damage.
Components inside the assembly board
- 1 × 100 Ω resistor;
- 6 × 220 Ω resistors;
- 4 × 1 kΩ resistors;
- 1 × 10 kΩ resistor;
- 1 × 50 kΩ resistor;
- 2 × 100 kΩ resistors;
- 2 × 470 kΩ resistors;
- 2 × 0.1 µF ceramic capacitors;
- 2 × 0.022 µF ceramic capacitors;
- 2 × 0.047 µF ceramic capacitors;
- 2 × 470 µF electrolytic capacitors;
- 1 × 100 µF electrolytic capacitor;
- 2 PNP transistors;
- 2 NPN transistors;
- one each of 5 mm red, yellow, green, blue, and white LEDs;
- one 5 mm RGB LED;
- one reed switch;
- 2 × 20 kΩ potentiometers;
- 1 × 50 kΩ potentiometer;
- one photoresistor;
- one breadboard;
- one piezo buzzer.
These components can be used to build simple LED circuits as well as hobby electronics circuits such as a multivibrator with blinking LEDs.
The breadboard lets learners add components and explore the properties of electricity and electromagnetic fields. The kit also includes the following parts for demonstrations and experiments.
Additional components
- one hand-cranked generator (DC motor);
- one solar panel;
- one set of male-to-male jumper wires;
- one set of male-to-female jumper wires;
- one compass;
- two bar magnets;
- one electromagnet;
- one two-terminal inductor;
- one three-terminal inductor;
- one copper rod with a wire;
- one zinc rod with a wire;
- three copper-and-zinc rod pairs connected by a wire;
- three tactile push buttons;
- two slide switches;
- two 50 cm cords;
- one each of 5 mm red, yellow, green, blue, and white LEDs.
During lessons, the additional components are used for hands-on demonstrations. Devices connected to the assembly board during experiments have leads that attach to the breadboard or the board's springs.
The kit includes a free digital teaching and learning package, provided after a network cooperation agreement is signed. Teacher training is available online, along with technical support.
Skills and competencies
Children learn the basics of electricity, electrical engineering, and electronics. They practise building closed circuits and signal circuits with LEDs. Activities cover gradually dimming a light with a variable resistor, capacitor, and touch sensor, as well as circuits that demonstrate a traffic light, a compass, a fruit battery, a blinking LED, a transistor, a photoresistor, and LEDs connected in series.






