Magnetic-field sensor (reed switch)

Specifications

  • Switched current: 0.7 A.
  • Switching capacity: 10 W.
  • Temperature range: −40 to +125 °C.

Overview

The magnetic-field sensor activates when a magnet is brought near it. The activation distance depends on the magnet’s strength and is usually no more than a few centimeters.

Using the sensor

Connecting

The sensor uses a standard 3-pin connector and plugs into any IN port on the Trackduino controller.

Programming

The Magnetic field block is in the Sensors block group.

Block and generated functionDescription
Magnetic-field sensor read block
bool digitalRead(int port)
Returns TRUE when the sensor is activated.
int port: port connected to the sensor.

Example project

Magnetic key

Generated code:

void setup()
{
  pinMode( IN1 , INPUT);
}

void loop()
{
  if (digitalRead(IN1))
  {
    startMotor(1, 80);
    startMotor(2, 80);
  }
  else
  {
    stopMotor(1);
    stopMotor(2);
  }
}