In primary school, Robotrack kits support lessons in construction, modelling and algorithms. In secondary school, they can be used in maths, physics, computing, chemistry, biology and technology lessons, as well as in specialist classes, lab work and projects.
Robotrack Malysh-1 robotics kit (ages 5+)
The kit contains at least 277 components
- Plastic beams (5 types) and blocks (10 types) in different shapes for building structures.
- Wheels (4 types), gears (3 types), and a gear wheel.
- Plastic shafts (4 types), plastic bushings (2 types), plastic and rubber couplings, flat plastic frames (3 types), platforms, rubber plates, eyes, brackets, levers, and arcs.
- Two controller boards: a beginner-level non-programmable controller with built-in programs and the multifunctional Trackduino controller.
- Two DC motors.
- Two types of sensors: two IR sensors and two touch sensors.
- One USB cable for the Trackduino controller.
- Two battery holders for AA batteries (6 V and 9 V).
- A disassembly key.
- Software and installation instructions.
The kit includes a digital teaching and learning package at no extra charge (provided after a network cooperation agreement is signed). It also includes access to Robotrack IDE and TrackyCode, online teacher training, and technical support.
Parts list: Download malysh1_230924.pdf.
Robotrack Malysh-2 robotics kit (ages 5+)
The kit contains at least 302 components
- Plastic beams (5 types) and blocks (10 types) in different shapes for building structures.
- Wheels (4 types), gears (3 types), and a gear wheel.
- Plastic shafts (4 types), plastic bushings (2 types), plastic and rubber couplings, flat plastic frames (3 types), platforms, rubber plates, eyes, brackets, levers, and arcs.
- Two controller boards: a programmable beginner-level controller and the multifunctional Trackduino controller.
- Two DC motors.
- Three types of sensors: two IR sensors, one remote-control sensor, and one sound sensor.
- One USB cable for the Trackduino controller.
- Two battery holders for AA batteries (6 V and 9 V).
- A disassembly key.
- One remote control.
- Software and installation instructions.
The kit can also be supplied with a servomotor.
The software provides a visual programming language interface with a graphics editor, code blocks, and tools for creating sprites and backgrounds, similar to Scratch. It has two modes: uploading a program to the controller and controlling a programmable controller in a visual, block-based, event-driven environment. The software supports learning the fundamentals of programming in this environment.
The kit includes a digital teaching and learning package at no extra charge (provided after a network cooperation agreement is signed). It also includes access to Robotrack IDE, TrackyCode, and Robotrack PDU, online teacher training, and technical support.
Parts list: Download malysh2_230924.pdf.
Robotrack Stazher A robotics kit (ages 7+)
The kit contains at least 667 components
- Plastic beams (4 types), blocks (5 types) in different shapes for building structures, and an angle bracket.
- Wheels (5 types) and gears (3 types).
- A set of track links; plastic shafts (4 types), plastic bushings (2 types), plastic and rubber couplings, iron bolts (3 types), nuts, flat plastic frames (3 types), and rubber adapters (2 types).
- Three controller boards: a beginner-level non-programmable controller with built-in programs, a programmable beginner-level controller, and the multifunctional Trackduino controller.
- Two DC motors and two servomotors (small and large servo horns).
- Five types of sensors: three IR sensors, one light sensor, two touch sensors, one digital sound sensor, and one remote-control sensor.
- One piezo emitter.
- Two LED modules.
- One USB cable for the Trackduino controller.
- One USB cable for the beginner-level board.
- Two battery holders for AA batteries (6 V and 9 V).
- One remote control.
- Tools: a screwdriver and a key.
- Software and installation instructions.
The kit includes a digital teaching and learning package at no extra charge (provided after a network cooperation agreement is signed). It also includes access to Robotrack IDE, TrackyCode, and Robotrack PDU, online teacher training, and technical support.
Parts list: Stazher A.
Robotrack Stazher B robotics kit (ages 7+): a learning kit for communication technologies and the Internet of Things
The kit contains at least 675 components
- Plastic beams in different shapes (4 types), blocks (5 types) for building objects, and an angle bracket.
- Wheels (5 types) and gears (3 types).
- A set of track links; plastic shafts (4 types), plastic bushings (2 types), plastic and rubber couplings, iron bolts (3 types), nuts, flat plastic frames (3 types), and rubber adapters (2 types).
- Three controller boards: a beginner-level non-programmable controller with built-in programs, a programmable beginner-level controller, and the multifunctional Trackduino controller.
- Two DC motors and two servomotors (small and large servo horns).
- Eleven types of sensors: one ultrasonic distance sensor, two touch sensors, one tilt sensor, one light sensor, one fire sensor, one magnetic field sensor, three IR sensors, one color and light sensor, one analogue sound sensor, one digital sound sensor, and one remote-control sensor.
- One piezo emitter.
- Two LED modules.
- One Wi-Fi module.
- One Micro-USB-to-USB cable.
- One USB cable for the Trackduino controller.
- One USB cable for the beginner-level board.
- Two battery holders for AA batteries (6 V and 9 V).
- One remote control.
- Tools: a screwdriver and a wrench.
- Software and installation instructions.
The kit includes a digital teaching and learning package at no extra charge (provided after a network cooperation agreement is signed), the Robotrack Internet of Things web application, access to Robotrack IDE, TrackyCode, and Robotrack PDU, online teacher training, and technical support.
Parts list: Stazher B.
Robotrack Mechanics and Mechatronics robotics kit (ages 9–17)
The kit contains at least 698 components
- Plastic beams in different shapes (4 types) and blocks (5 types) for building objects.
- Wheels (5 types), gears (6 types), and a small rack.
- Plastic angle brackets and worm gears.
- A set of track links; plastic shafts (4 types) and metal shafts (2 types); plastic bushings (2 types); rubber and plastic couplings; iron bolts (4 types); nuts; flat plastic frames (3 types); rubber adapters (2 types); magnetic bolt mounts; cams; and pulleys (2 types).
- One multifunctional Trackduino controller.
- Two DC motors and two servomotors.
- Servo horns (2 types).
- Servomotor frames (2 types).
- Two LED modules.
- One piezo emitter.
- Five types of sensors: three infrared sensors, one light sensor, two touch sensors, one digital sound sensor, and one remote-control sensor.
- One USB cable for the Trackduino controller.
- One 9 V AA battery holder.
- One remote control.
- Tools: a screwdriver and a wrench.
- Software and installation instructions.
The kit includes a digital teaching and learning package at no extra charge (provided after a network cooperation agreement is signed). It also includes access to Robotrack IDE, TrackyCode, and Robotrack PDU, online teacher training, and technical support.
Parts list: Download part_list_mexanika_i_mexatronika.pdf.
Robotrack My Robot robotics kit (ages 10+)
The kit contains at least 670 components
- Plastic beams in different shapes (5 types) and blocks (10 types) for building objects.
- Wheels (4 types), gears (3 types), and a gear wheel.
- Levers, plastic angle brackets, and worm gears.
- A set of plastic shafts (4 types), plastic bushings (2 types), rubber and plastic couplings, iron bolts (5 types), nuts, washers, flat plastic frames (3 types), platforms, rubber plates, eyes, arcs, and plastic pins (5 types).
- A pin insertion tool.
- Two controller boards: a non-programmable controller with built-in programs and the multifunctional Trackduino controller.
- Two large and two small DC motors.
- Motor frames (3 types).
- Six types of sensors: one ultrasonic distance sensor, two infrared sensors, one color and light sensor, two touch sensors, two external encoders, and one accelerometer/gyroscope.
- One USB cable for the Trackduino controller.
- Two battery holders for AA batteries (9 V and 6 V).
- Tools: a screwdriver and a wrench.
- Software and installation instructions.
The kit includes a digital teaching and learning package at no extra charge (provided after a network cooperation agreement is signed). It also includes access to Robotrack IDE and TrackyCode, online teacher training, and technical support.
Parts list: My Robot.
Robotrack My Robot Pro robotics kit (ages 10+)
The kit contains at least 521 components
- Plastic beams in different shapes (5 types) and blocks (10 types) for building objects.
- Wheels (4 types), gears (3 types), and a gear wheel.
- Levers, plastic angle brackets, and worm gears.
- A set of plastic shafts (4 types), plastic bushings (2 types), rubber and plastic couplings, iron bolts (2 types), nuts, washers, flat plastic frames (3 types), track links, eyes, and plastic pins (3 types).
- A pin insertion tool.
- One controller with a built-in operating system. It is designed for learning the fundamentals of artificial intelligence (AI), the Internet of Things (IoT), and Python programming. It has built-in Wi-Fi and Bluetooth, can store up to eight programs at once and switch between them, and has a full-color IPS display for showing sensor data in tables and charts and creating games that run on the controller.
- One multifunctional Trackduino controller.
- One USB cable for the Trackduino controller.
- Two DC motors.
- One servomotor kit.
- Six types of sensors: one ultrasonic distance sensor, one infrared sensor, one remote-control sensor, two touch sensors, one color and light sensor, and two line sensors.
- One piezo emitter.
- One remote control.
- One 9 V AA battery holder.
- Tools: a screwdriver and a wrench.
- Software and installation instructions.
The kit includes digital lessons for working with the Robotrack My Robot Pro kit at no extra charge (provided after a network cooperation agreement is signed). It also includes access to Robotrack IDE, TrackyCode, and Robotrack PDU, online teacher training, and technical support.
Parts list: Download part_-_list_moj_probot_pro.pdf.
Robotrack Basic robotics kit (ages 12+)
The kit contains at least 831 components
- Plastic beams in different shapes (5 types) and blocks (10 types) for building objects.
- Metal blocks in different shapes (10 types).
- Wheels (5 types), gears (3 types), and a gear wheel.
- Levers, plastic angle brackets, and worm gears.
- A set of track links; plastic shafts (4 types) and metal shafts (3 types); plastic bushings (2 types); rubber, plastic, and metal couplings; iron bolts (3 types); nuts; washers; flat plastic frames (3 types); rubber adapters (2 types); rectangular connecting beams (2 types); and plastic pins (5 types).
- A pin insertion tool.
- One multifunctional Trackduino controller.
- Two DC motors and one servomotor.
- Motor frames (3 types).
- Servo horns (2 types).
- Servomotor frames (2 types).
- Seven types of sensors: one ultrasonic distance sensor, three infrared sensors, one remote-control receiver sensor, one light sensor, one color and light sensor, two touch sensors, and two external encoders.
- One USB cable for the Trackduino controller.
- One 9 V AA battery holder.
- One remote control.
- Tools: a screwdriver and a wrench.
- Software and installation instructions.
The kit includes a digital teaching and learning package at no extra charge (provided after a network cooperation agreement is signed). It also includes access to Robotrack IDE, TrackyCode, and Robotrack PDU, online teacher training, and technical support.
Parts list: Download part_list_bazovyy.pdf.
Robotrack Basic Technology robotics kit (grades 5–9)
Recommended for the Robotics module in grades 5–9 Technology classes.
The kit contains at least 839 components
- Plastic beams in different shapes (5 types) and blocks (10 types) for building objects.
- Metal blocks in different shapes (10 types).
- Wheels (5 types), gears (3 types), and a gear wheel.
- Levers, plastic angle brackets, and worm gears.
- A set of track links; plastic shafts (4 types) and metal shafts (3 types); plastic bushings (2 types); rubber, plastic, and metal couplings; iron bolts (3 types); nuts; washers; flat plastic frames (3 types); rubber adapters (2 types); rectangular connecting beams (2 types); and plastic pins (5 types).
- A pin insertion tool.
- One multifunctional Trackduino controller.
- Two DC motors and two servomotors.
- Motor frames (3 types).
- Servo horns (2 types).
- Servomotor frames (2 types).
- Three LED modules.
- One piezo emitter.
- Seven types of sensors: one ultrasonic distance sensor, three infrared sensors, one remote-control receiver sensor, one light sensor, one color and light sensor, two touch sensors, and two external encoders.
- One USB cable for the Trackduino controller.
- One 9 V AA battery holder.
- One remote control.
- Tools: a screwdriver and a wrench.
- Software and installation instructions.
The kit includes a digital teaching and learning package at no extra charge (provided after a network cooperation agreement is signed). It also includes access to Robotrack IDE, TrackyCode, and Robotrack PDU, online teacher training, and technical support.
Parts list: Download bazovyj-texnologija.pdf.
Robotrack Basic Extended robotics kit (ages 12+)
The kit contains at least 856 components
- Plastic beams in different shapes (5 types) and blocks (10 types) for building objects.
- Metal blocks in different shapes (10 types).
- Wheels (5 types), gears (3 types), and a gear wheel.
- Levers, plastic angle brackets, and worm gears.
- A set of track links; plastic shafts (4 types) and metal shafts (3 types); plastic bushings (2 types); rubber, plastic, and metal couplings; iron bolts (3 types); nuts; washers; flat plastic frames (3 types); rubber adapters (2 types); rectangular connecting beams (2 types); and plastic pins (5 types).
- A pin insertion tool.
- One multifunctional Trackduino controller.
- Two DC motors and two servomotors.
- Motor frames (3 types).
- Servo horns (2 types).
- Servomotor frames (2 types).
- Six LED modules.
- One piezo emitter.
- One 2.4-inch TFT LCD touchscreen.
- One speaker.
- Thirteen types of sensors: one ultrasonic distance sensor, three infrared sensors, one remote-control receiver sensor, one light sensor, one color and light sensor, four touch sensors, two external encoders, one sound sensor, one accelerometer/gyroscope, one tilt sensor, one vibration sensor, one fire sensor, and two magnetic field sensors.
- One USB cable for the Trackduino controller.
- One 9 V AA battery holder.
- One remote control.
- Tools: a screwdriver and a wrench.
- Software and installation instructions.
The kit includes a digital teaching and learning package at no extra charge (provided after a network cooperation agreement is signed). It also includes access to Robotrack IDE, TrackyCode, and Robotrack PDU, online teacher training, and technical support.
Parts list: Download bazovyj-rasshirennyj.pdf.
Robotrack Advanced Manipulator robotics kit
The kit includes
- A set of metal parts for assembling a manipulator with 6 degrees of freedom.
- A set of metal and plastic parts for assembling platforms (17 types).
- A technical vision module.
- A rechargeable battery pack.
- One multifunctional Trackduino controller.
- Six servos.
- A mains charger.
- A pencil holder.
- An electromagnet.
- A USB cable.
- Tools: a key, a combination wrench, and a screwdriver.
- Instructions for assembling, connecting, and programming the standard model.
Pencil holder specifications
- Pencil diameter: 6–8 mm.
- Holder thickness: 1 mm.
Electromagnet specifications
- Supply voltage: 5 V.
- Holding capacity: up to 3 kg.
Servo specifications
- Operating voltage: 4.8–7.2 V.
- Maximum current without load: 300 mA.
- Maximum current under load: 1,000 mA.
- Stall current: 2,000 mA.
- Rotation range: 180°.
- No-load speed at 4.8 V: 60° in 0.18 s.
- No-load speed at 6.6 V: 60° in 0.14 s.
- Maximum torque at 4.8 V: 18.5 kg·cm.
- Maximum torque at 7.2 V: 21.8 kg·cm.
- Dimensions (L × W × H): 40 × 20 × 40 mm.
- Weight: 65 g.
The kit includes electronic practical lessons at no extra charge (provided after a network cooperation agreement is signed). It also includes access to Robotrack IDE and TrackyCode, online teacher training, and technical support.
Robotrack robotics kit with a soft-grip manipulator
The kit contains
- A set of metal parts for assembling a manipulator with 6 degrees of freedom.
- A set of metal and plastic parts for assembling platforms.
- A pneumatic soft gripper for the robot. The gripper is designed to prevent damage to fragile objects during movement, including sorting and moving fruit, vegetables, and poultry products. Made of plastic and silicone, it is primarily used in robotics, industrial automation, and agriculture.
- A machine-vision module.
- A rechargeable battery pack.
- A mains charger.
- A Trackduino board.
- Six servomotors.
- A pencil holder.
- An electromagnet.
- A USB cable.
- Tools: a key, a combination wrench, and a screwdriver.
- Assembly, connection, and programming instructions.
Pencil holder specifications
- Pencil diameter: 6–8 mm.
- Holder thickness: 1 mm.
Electromagnet specifications
- Supply voltage: 5 V.
- Holding capacity: up to 3 kg.
Soft gripper specifications
- Supply voltage: 12 V.
- Number of gripper “fingers”: 4.
- Holding capacity: up to 200 g.
Servo specifications
- Operating voltage: 4.8–7.2 V.
- Maximum current without load: 300 mA.
- Maximum current under load: 1,000 mA.
- Stall current: 2,000 mA.
- Rotation range: 180°.
- No-load speed at 4.8 V: 60° in 0.18 s.
- No-load speed at 6.6 V: 60° in 0.14 s.
- Maximum torque at 4.8 V: 18.5 kg·cm.
- Maximum torque at 7.2 V: 21.8 kg·cm.
- Dimensions (L × W × H): 40 × 20 × 40 mm.
- Weight: 65 g.
Electronic practical lessons are included at no extra charge (provided after a network cooperation agreement is signed). The kit also includes access to Robotrack IDE and TrackyCode, online teacher training, and technical support.
Robotrack Electrical Engineering educational kit (ages 12+)
An educational kit for studying the fundamentals of electronics and electrical engineering, microprocessors, and programming electronic devices. It covers electronics, electromechanics, and microprocessor technology.
Components inside the workbench
- WS2812B-V5 addressable LEDs — 8.
- FYLS-5050RGB RGB LED — 1.
- FYLS-5050UWC white LED — 1.
- FYLS-5050PG3C green LED — 1.
- FYLS-5050UR3C red LED — 1.
- FYLS-5050UY3C yellow LED — 1.
- IT-1102WD buttons — 4.
- JCK1E471M100105 capacitors — 2.
- JCK1E101M063077 capacitors — 2.
- CR-05FL7–220R resistors — 11.
- CR-05FL7–100R resistors — 8.
- CR-05FL7—-1K resistors — 2.
- RC0805JR-0710KL resistors — 2.
- R1212N-A10K potentiometers — 2.
- 1.3-inch I2C OLED display — 1.
- DS1023-2X2 (PBD 4) connectors — 87.
- DS-1023 1×3 (PBS-3) connectors — 4.
- DS-1023 1×4 (PBS-4) connector — 1.
- MTS-102-A2 on-on toggle switches — 2.
- МКА-14103МS reed switch — 1.
- TMB12A03 buzzer — 1.
- GL5506 (4–7K) photoresistor — 1.
- SI2300A MOSFET transistor — 1.
- SS8550 PNP transistor — 1.
- KPA-3010P3C IR phototransistor — 1.
- AA-57*17 battery holders — 8.
- DS-205 power socket — 1.
- SS34 Schottky diodes — 2.
- SPQ105-101M inductor — 1.
- KP-2012SGC KGB/Green LED — 1.
- Microphone module — 1.
Additional components
- Enclosed Trackduino board — 1.
- Ultrasonic distance sensor — 1.
- Gyroscope/accelerometer — 1.
- DC motor — 1.
- Servomotor — 1.
- Infrared sensors — 2.
- Soil moisture sensor — 1.
- Weather sensor — 1.
- 400-point breadboard — 1.
- SS8050 transistors — 4.
- 40-wire male-to-male, 20 cm cables — 1 set.
- 40-wire female-to-male, 20 cm cables — 1 set.
- Digital multimeter — 1.
- Power adapter cables — 2.
- MRT5 USB cable — 1.
- AA-57*17 battery holders — 2.
- Alligator-clip cables — 3.
- Plastic construction elements: 24 mm pins — 10, 70 mm plastic shafts — 2, size 30 gear — 1, size 15 beam — 4.
- 5RWWC white LEDs, 14,000 MCD, 6500 K, 3.4 V, 15D — 3.
Technical specifications
Enclosed Trackduino board
- 16 general-purpose input/output (GPIO) ports in four groups. The “IN1”–“IN4” and “OUT1”–“OUT4” groups connect through voltage selectors to 5 V and 3.3 V step-down regulators; “IN5”–“IN8” and “OUT5”–“OUT8” connect to a 5 V regulator.
- Two UART interfaces with power.
- One Arduino Uno R3 interface, independent of other ports.
- One MicroSD card slot.
- Automatic power switching between external power and USB.
- One RGB LED and one on/off button.
- One USB Type-B port.
- Operating voltage: 5 V.
- Input voltage: 12 V; maximum input voltage: 18 V.
- Four ports for connecting DC motors.
- Built-in Bluetooth module.
- Two I2C interfaces and one ICSP interface.
- Five control buttons.
Ultrasonic distance sensor
- Model: HC-SR04.
- Supply voltage: 5.0 V.
- Operating current: 15 mA.
- Operating frequency: 40 kHz.
- Operating angle: 15°.
- Minimum measuring distance: 2 cm.
- Maximum measuring distance: 300 cm.
Accelerometer and gyroscope
- Model: MPU-6050.
- Supply voltage: 3.3–5.0 V.
- Operating current: less than 5 mA.
- Accelerometer ranges: ±2g, ±4g, ±8g, ±16g.
- Gyroscope angular velocity ranges: ±250, 500, 1000, 2000°/s.
- Number of axes: 3.
- Connection interface: 4-wire I2C.
DC motor
- Control: automatic phase adjustment.
- Operating voltage: 5.5–9 V.
- Operating temperature: −20°C to 60°C.
- Speed: 270 rpm at 9 V.
- Torque: 2.7 kgf·cm ±15% at 5.5 V / 3.5 kgf·cm ±15% at 9 V.
- Operating angle: 360°.
- Operating current: 80–110 mA.
- Connector cable length: 240 mm.
Servomotor
- Operating voltage: 3.7–6 V.
- Rotation range: 180°.
- Speed: 0.13 s per 60°.
- Load current: 600 mA at 6 V.
- Torque: 10.6 kg·cm at 6.0 V.
Infrared sensor
- Material: GaAsP/GaAlInP (gallium arsenide phosphide / gallium aluminum indium phosphide).
- Lens type: “water”.
- Maximum operating range specified at Ta = 25°C.
- Voltage range: 1.1–1.5 V.
- Operating temperature: −40°C to +85°C.
- Peak wavelength: 940 nm.
- Maximum current consumption: 10 μA.
The kit includes a digital teaching and learning package at no extra charge (provided after a network cooperation agreement is signed). It also includes access to Robotrack IDE, online teacher training, and technical support.
Robotrack Electrical Engineering Pro rapid prototyping educational kit (ages 12+)
An educational kit for rapid prototyping of electronic devices based on a microcontroller platform with a built-in interpreter.
Components inside the workbench
- WS2812B-V5 addressable LEDs — 8.
- FYLS-5050RGB RGB LED — 1.
- FYLS-5050UWC white LED — 1.
- FYLS-5050PG3C green LED — 1.
- FYLS-5050UR3C red LED — 1.
- FYLS-5050UY3C yellow LED — 1.
- IT-1102WD buttons — 4.
- JCK1E471M100105 capacitors — 2.
- JCK1E101M063077 capacitors — 2.
- CR-05FL7–220R resistors — 11.
- CR-05FL7–100R resistors — 8.
- CR-05FL7—-1K resistors — 2.
- RC0805JR-0710KL resistors — 2.
- R1212N-A10K potentiometers — 2.
- 1.3-inch I2C OLED display — 1.
- DS1023-2X2 (PBD 4) connectors — 87.
- DS-1023 1×3 (PBS-3) connectors — 4.
- DS-1023 1×4 (PBS-4) connector — 1.
- MTS-102-A2 on-on toggle switches — 2.
- МКА-14103МS reed switch — 1.
- TMB12A03 buzzer — 1.
- GL5506 (4–7K) photoresistor — 1.
- SI2300A MOSFET transistor — 1.
- SS8550 PNP transistor — 1.
- KPA-3010P3C IR phototransistor — 1.
- AA-57*17 battery holders — 8.
- DS-205 power socket — 1.
- SS34 Schottky diodes — 2.
- SPQ105-101M inductor — 1.
- KP-2012SGC KGB/Green LED — 1.
- Microphone module — 1.
Additional components
- Enclosed Trackduino Pro board — 1.
- Ultrasonic distance sensor — 1.
- Gyroscope/accelerometer — 1.
- DC motor — 1.
- Servomotor — 1.
- Infrared sensors — 2.
- Soil moisture sensor — 1.
- Weather sensor — 1.
- 400-point breadboard — 1.
- SS8050 transistors — 4.
- 40-wire male-to-male, 20 cm cables — 1 set.
- 40-wire female-to-male, 20 cm cables — 1 set.
- Digital multimeter — 1.
- Power adapter cables — 2.
- MRT5 USB cable — 1.
- AA-57*17 battery holders — 2.
- Alligator-clip cables — 3.
- Plastic construction elements: 24 mm pins — 10, 70 mm plastic shafts — 2, size 30 gear — 1, size 15 beam — 4.
- 5RWWC white LEDs, 14,000 MCD, 6500 K, 3.4 V, 15D — 3.
Technical specifications
Enclosed Trackduino Pro board
- Connects to a computer via USB or Bluetooth.
- Built-in Bluetooth supports sending and receiving data and flashing the microcontroller.
- Five programmable buttons, each connected to its own I/O port. Together with the RGB LED, these provide a basic human-machine interface without external devices.
- MicroSD card slot for expanding non-volatile storage.
- Power supply: 7–12 V. Two power connectors are provided: a jack for battery packs and a screw terminal for other 6–18 V sources.
- Eight input ports with power (GND–Vin–S), each with a digital-to-analog converter; ports 1–4 support interrupts. Selectable supply voltage: 5 V/3 V.
- Eight output ports with power; ports 1–5 provide hardware PWM for controlling third-party chips. Selectable supply voltage: 5 V/3 V.
- Four DC motor ports driven by two L293 drivers with overcurrent protection.
- Each motor channel uses two output ports to select rotation direction and braking, plus an additional PWM output to control speed.
- Standard Arduino UNO R3 interface, independent of the other I/O ports, supports Arduino shields and libraries and adds 24 I/O connections for external devices.
- RGB LED can be programmed to display approximately 16 million colors for visual indication of events or parameters.
- Two exposed USART ports with power (RX, TX, 5 V, GND).
- Two exposed I2C ports with power (SCL, SDA, 5 V, GND).
- BOOT mode switch: RUN and DFU.
- Processor: STM32F407 with 1 MB flash memory:
- High-performance 32-bit Cortex-M4F microcontroller with floating-point DSP.
- Up to 82 I/O ports.
- Clock speed up to 168 MHz.
- Flash program memory: 1 MB.
- RAM: 196 KB.
- Backup SRAM: 4 KB (EEPROM equivalent).
- DSP instructions and floating-point support.
- 16-bit timers: 2 basic, 8 general-purpose, 2 advanced, and 2 watchdog timers.
- Two 32-bit general-purpose timers.
- USB 2.0 full-speed device/host/OTG with on-chip PHY.
- USB 2.0 high-speed/full-speed device/host/OTG with separate DMA and full-speed PHY; ULPI supported.
- 10/100 Ethernet MAC with separate DMA and support for IEEE 1588v2, MII/RMII PHY interfaces.
- Three SPI interfaces (37.5 Mbit/s); two are multiplexed with full-duplex I2S for high-quality audio.
- Three I2C interfaces with SMBus/PMBus support.
- Four USART and two UART interfaces, up to 10.5 Mbit/s; ISO 7816, LIN, IrDA, and modem control.
- Two CAN 2.0B Active interfaces.
- SDIO for SD cards.
- DCMI 8–14-bit parallel camera interface (up to 54 MB/s).
- Analog random-number generator.
- Built-in CRC calculation unit.
- 82 GPIO pins.
- RTC (real-time clock).
- Three 12-bit ADCs: 2.4 million samples per second, 16 channels, up to 7.2 million samples per second in triple-interleaved mode.
- Two 12-bit DACs.
- 16-channel DMA controller with FIFO and burst-transfer support.
- Parallel LCD interface, 8080/6800 modes.
- FSMC static-memory controller supporting CompactFlash, SRAM, PSRAM, NOR, and NAND.
- JTAG or SW debugging.
- Operating temperature: −45°C to +85°C.
Ultrasonic distance sensor
- Model: HC-SR04.
- Supply voltage: 5.0 V.
- Operating current: 15 mA.
- Operating frequency: 40 kHz.
- Operating angle: 15°.
- Minimum measuring distance: 2 cm.
- Maximum measuring distance: 300 cm.
Accelerometer and gyroscope
- Model: MPU-6050.
- Supply voltage: 3.3–5.0 V.
- Operating current: less than 5 mA.
- Accelerometer ranges: ±2g, ±4g, ±8g, ±16g.
- Gyroscope angular velocity ranges: ±250, 500, 1000, 2000°/s.
- Number of axes: 3.
- Connection interface: 4-wire I2C.
DC motor
- Control: automatic phase adjustment.
- Operating voltage: 5.5–9 V.
- Operating temperature: −20°C to 60°C.
- Speed: 270 rpm at 9 V.
- Torque: 2.7 kgf·cm ±15% at 5.5 V / 3.5 kgf·cm ±15% at 9 V.
- Operating angle: 360°.
- Operating current: 80–110 mA.
- Connector cable length: 240 mm.
Servomotor
- Operating voltage: 3.7–6 V.
- Rotation range: 180°.
- Speed: 0.13 s per 60°.
- Load current: 600 mA at 6 V.
- Torque: 10.6 kg·cm at 6.0 V.
Infrared sensor
- Material: GaAsP/GaAlInP (gallium arsenide phosphide / gallium aluminum indium phosphide).
- Lens type: “water”.
- Maximum operating range specified at Ta = 25°C.
- Voltage range: 1.1–1.5 V.
- Operating temperature: −40°C to +85°C.
- Peak wavelength: 940 nm.
- Maximum current consumption: 10 μA.
The kit includes a digital teaching and learning package at no extra charge (provided after a network cooperation agreement is signed). It also includes access to Robotrack IDE, online teacher training, and technical support.
Robotrack Young Neurophysiologist-Engineer digital educational complex: Neuroheadset

The Neuroheadset set includes
- Neuroheadset amplifier unit.
- Eight dry electrodes for EEG recording.
- Two reference EEG electrodes.
- One ground electrode.
- 5 V rechargeable battery pack with micro USB charging.
- Head and shoulder fastening system.
- Micro-USB-to-USB cable for connecting the amplifier unit to a computer.
- Robotrack LMS digital platform.
The set includes a digital teaching and learning package at no extra charge (provided after a network cooperation agreement is signed), access to Robotrack IDE, online teacher training, and technical support.
Learn more about neurotechnology.
Robotrack Young Neurophysiologist-Engineer digital educational complex: Electroheadset

The Electroheadset set includes
- Electroheadset electronic unit.
- 50 disposable electrodes for measuring ECG and EMG signals.
- Three Touch Proof cables for connecting the electrodes to the Electroheadset electronic unit.
- One mini-USB-to-USB cable for connecting the electronic unit to a computer.
- Robotrack LMS digital platform.
The set includes a digital teaching and learning package at no extra charge (provided after a network cooperation agreement is signed), access to Robotrack IDE, online teacher training, and technical support.
Learn more about neurotechnology.
