For vocational education

The Robotrack Engineer kit supports projects and research in vocational colleges and universities. It can be used in technical subjects including mechatronics, instrumentation, electronics, radio engineering and process automation. The kit’s controller can be used to program robotic systems.

Engineer kit

The Engineer kit contains at least 2,021 components

  • Plastic connecting beams in different shapes (5 types) and at least 9 types of metal and plastic blocks for building objects.
  • Wheels (8 types), gears (4 types), levers, plastic angle brackets, and track links.
  • Plastic shafts (4 types), metal shafts (3 types), plastic bushings, plastic, rubber, and metal couplings, iron bolts in five sizes, nuts, and washers.
  • Flat plastic frames (3 types) and rubber adapters (2 types).
  • Volumetric rectangular connecting beams (2 types).
  • Plastic pins in 5 sizes and a pin insertion tool.
  • One advanced-level main board.
  • Two DC motors and one higher-power servomotor for advanced use, plus two external encoders.
  • Sensors (at least 13 types), three types of LED modules, and a gyroscope.
  • USB cable for the advanced-level board.
  • One 9 V battery holder.
  • Remote control.
  • Screwdriver and wrench.
  • Link to Robotrack software, instructions, and at least 39 ready-to-use Trackduino firmware files with robot programming algorithms.

Parts list: Download inzhener.pdf.

Basic kit (ages 12+)

The kit contains at least 831 components

  • Plastic beams in different shapes (5 types) and blocks (11 types) for building objects.
  • Metal blocks in different shapes (10 types).
  • Wheels (5 types).
  • Gears (4 types), levers, plastic angle brackets, track links, and worm gears.
  • Plastic shafts (4 types), metal shafts (3 types), plastic bushings, plastic, rubber, and metal couplings, iron bolts in 3 sizes, nuts, and washers.
  • Flat plastic frames (3 types) and rubber adapters (2 types).
  • Volumetric rectangular connecting beams (2 types).
  • Plastic pins in 5 sizes and a pin insertion tool.
  • One advanced-level main board.
  • Two DC motors and one advanced-level servomotor, plus two external encoders.
  • Sensors (6 types).
  • USB cable for the advanced-level board.
  • 9 V battery holder.
  • Remote control.
  • Screwdriver and wrench.
  • Link to Robotrack software, instructions, and at least 39 ready-to-use Trackduino firmware files with robot programming algorithms; the Robotrack Sensors kit is also required.

Parts list: Download part_list_bazovyy.pdf.

Basic kit (extended version with machine-vision module)

The kit contains at least 867 components

  • Plastic beams in different shapes (5 types) and blocks (11 types) for building objects.
  • Metal blocks in different shapes (10 types).
  • Wheels (5 types).
  • Gears (4 types), levers, plastic angle brackets, and track links.
  • Plastic shafts (4 types), metal shafts (3 types), plastic bushings, plastic, rubber, and metal couplings, iron bolts in 3 sizes, nuts, and washers.
  • Flat plastic frames (3 types) and rubber adapters (2 types).
  • Volumetric rectangular connecting beams (2 types).
  • Plastic pins in 5 sizes and a pin insertion tool.
  • One advanced-level main board.
  • Two advanced-level DC motors and one servomotor, plus two external encoders.
  • One machine-vision camera module.
  • 37 cards for the machine-vision module.
  • Sensors (6 types).
  • USB cable for the advanced-level board.
  • 9 V battery holder.
  • Remote control.
  • Screwdriver and wrench.
  • Link to Robotrack software, instructions, and at least 39 ready-to-use Trackduino firmware files with robot programming algorithms; the Robotrack Sensors kit is also required.

Parts list: Download bazovyj1_modul_tech_zreniya.pdf.

Metal resource kit

The kit contains at least 342 components

  • 60 metal plates for building objects.
  • Connecting beams in two types.
  • Bolts in 4 sizes, nuts, and washers.
  • Screwdriver and wrench.
  • Angle brackets (1 type).
  • Key and screwdriver.
  • Aluminum arcs.
  • Aluminum toothed wheels.

Parts list: Download metall-res.pdf.

Sensors resource kit

The kit contains at least 25 components

  • LED modules in three colors.
  • Accelerometer/gyroscope.
  • Two external encoders.
  • Fire sensor.
  • Sound sensor.
  • Touch sensor.
  • Tilt sensor.
  • Vibration sensor.
  • Magnetic-field sensor.
  • Piezo emitter.
  • Ultrasonic distance sensor.
  • Color and light sensors.
  • Touch sensor.
  • Remote-control sensor.
  • Infrared sensor (IR sensor).
  • Speaker.

Parts list: Download datchiki.pdf.

Fasteners resource kit

The kit contains at least 377 components

  • Plastic angle brackets.
  • Bolts in 5 sizes, nuts, and washers.
  • Plastic pins in 5 sizes and a pin insertion tool.
  • Key and screwdriver.

Parts list: Download krepezh1.pdf.

Wheels and tracks resource kit

The kit contains at least 124 components

  • Wheels in 8 types and sizes.
  • Track links.

Parts list: Download kolesa_i_gusenicy.pdf.

Shafts and gears resource kit

The kit contains at least 328 components

  • Plastic shafts (4 types) and aluminum shafts (5 types).
  • Plastic, rubber, and metal couplings.
  • Plastic bushings in 2 types, gears in 4 types, and levers.

Parts list: Download valy_i_shesterenki.pdf.

Robotrack Electrical Engineering educational kit

An educational kit for studying the fundamentals of electronics and electrical engineering, microprocessors, and programming electronic devices. It covers electronics, electromechanics, and microprocessor technology.

The complex includes a workbench and additional components. The workbench simplifies the assembly of electronic circuits and allows them to be assembled and tested without soldering. To build a circuit, insert the wire terminal into a connector to join the contacts. This method of connecting wires is safe, simple, and easy to understand.

Components inside the workbench

  • WS2812B-V5 addressable LEDs — 8.
  • FYLS-5050RGB RGB LED — 1.
  • FYLS-5050UWC white LED — 1.
  • FYLS-5050PG3C green LED — 1.
  • FYLS-5050UR3C red LED — 1.
  • FYLS-5050UY3C yellow LED — 1.
  • IT-1102WD buttons — 4.
  • JCK1E471M100105 capacitors — 2.
  • JCK1E101M063077 capacitors — 2.
  • CR-05FL7–220R resistors — 11.
  • CR-05FL7–100R resistors — 8.
  • CR-05FL7—-1K resistors — 2.
  • RC0805JR-0710KL resistors — 2.
  • R1212N-A10K potentiometers — 2.
  • 1.3-inch I2C OLED display — 1.
  • DS1023-2X2 (PBD 4) connectors — 87.
  • DS-1023 1×3 (PBS-3) connectors — 4.
  • DS-1023 1×4 (PBS-4) connector — 1.
  • MTS-102-A2 on-on toggle switches — 2.
  • МКА-14103МS reed switch — 1.
  • TMB12A03 buzzer — 1.
  • GL5506 (4–7K) photoresistor — 1.
  • SI2300A MOSFET transistor — 1.
  • SS8550 PNP transistor — 1.
  • KPA-3010P3C IR phototransistor — 1.
  • AA-57*17 battery holders — 8.
  • DS-205 power socket — 1.
  • SS34 Schottky diodes — 2.
  • SPQ105-101M inductor — 1.
  • KP-2012SGC KGB/Green LED — 1.
  • Microphone module — 1.

Additional components

  • Enclosed Trackduino board — 1.
  • Ultrasonic distance sensor — 1.
  • Gyroscope/accelerometer — 1.
  • DC motor — 1.
  • Servomotor — 1.
  • Infrared sensors — 2.
  • Soil moisture sensor — 1.
  • Weather sensor — 1.
  • 400-point breadboard — 1.
  • SS8050 transistors — 4.
  • 40-wire male-to-male, 20 cm cables — 1 set.
  • 40-wire female-to-male, 20 cm cables — 1 set.
  • Digital multimeter — 1.
  • Power adapter cables — 2.
  • MRT5 USB cable — 1.
  • AA-57*17 battery holders — 2.
  • Alligator-clip cables — 3.
  • Plastic construction elements: 24 mm pins — 10, 70 mm plastic shafts — 2, size 30 gear — 1, size 15 beam — 4.
  • 5RWWC white LEDs, 14,000 MCD, 6500 K, 3.4 V, 15D — 3.

Technical specifications

Enclosed Trackduino board

  • 16 general-purpose input/output (GPIO) ports in four groups. The “IN1”–“IN4” and “OUT1”–“OUT4” groups connect through voltage selectors to 5 V and 3.3 V step-down regulators; “IN5”–“IN8” and “OUT5”–“OUT8” connect to a 5 V regulator.
  • Two UART interfaces with power.
  • One Arduino Uno R3 interface, independent of other ports.
  • One MicroSD card slot.
  • Automatic power switching between external power and USB.
  • One RGB LED and one on/off button.
  • One USB Type-B port.
  • Operating voltage: 5 V.
  • Input voltage: 12 V; maximum input voltage: 18 V.
  • Four ports for connecting DC motors.
  • Built-in Bluetooth module.
  • Two I2C interfaces and one ICSP interface.
  • Five control buttons.

Ultrasonic distance sensor

  • Model: HC-SR04.
  • Supply voltage: 5.0 V.
  • Operating current: 15 mA.
  • Operating frequency: 40 kHz.
  • Operating angle: 15°.
  • Minimum measuring distance: 2 cm.
  • Maximum measuring distance: 300 cm.

Accelerometer and gyroscope

  • Model: MPU-6050.
  • Supply voltage: 3.3–5.0 V.
  • Operating current: less than 5 mA.
  • Accelerometer ranges: ±2g, ±4g, ±8g, ±16g.
  • Gyroscope angular velocity ranges: ±250, 500, 1000, 2000°/s.
  • Number of axes: 3.
  • Connection interface: 4-wire I2C.

DC motor

  • Control: automatic phase adjustment.
  • Operating voltage: 5.5–9 V.
  • Operating temperature: −20°C to 60°C.
  • Speed: 270 rpm at 9 V.
  • Torque: 2.7 kgf·cm ±15% at 5.5 V / 3.5 kgf·cm ±15% at 9 V.
  • Operating angle: 360°.
  • Operating current: 80–110 mA.
  • Connector cable length: 240 mm.

Servomotor

  • Operating voltage: 3.7–6 V.
  • Rotation range: 180°.
  • Speed: 0.13 s per 60°.
  • Load current: 600 mA at 6 V.
  • Torque: 10.6 kg·cm at 6.0 V.

Infrared sensor

  • Material: GaAsP/GaAlInP (gallium arsenide phosphide / gallium aluminum indium phosphide).
  • Lens type: “water”.
  • Maximum operating range specified at Ta = 25°C.
  • Voltage range: 1.1–1.5 V.
  • Operating temperature: −40°C to +85°C.
  • Peak wavelength: 940 nm.
  • Maximum current consumption: 10 μA.

The kit includes a digital teaching and learning package at no extra charge (provided after a network cooperation agreement is signed). It also includes access to Robotrack IDE, online teacher training, and technical support.


Robotrack Electrical Engineering Pro rapid prototyping educational kit (ages 12+)

An educational kit for rapid prototyping of electronic devices based on a microcontroller platform with a built-in interpreter.

Components inside the workbench

  • WS2812B-V5 addressable LEDs — 8.
  • FYLS-5050RGB RGB LED — 1.
  • FYLS-5050UWC white LED — 1.
  • FYLS-5050PG3C green LED — 1.
  • FYLS-5050UR3C red LED — 1.
  • FYLS-5050UY3C yellow LED — 1.
  • IT-1102WD buttons — 4.
  • JCK1E471M100105 capacitors — 2.
  • JCK1E101M063077 capacitors — 2.
  • CR-05FL7–220R resistors — 11.
  • CR-05FL7–100R resistors — 8.
  • CR-05FL7—-1K resistors — 2.
  • RC0805JR-0710KL resistors — 2.
  • R1212N-A10K potentiometers — 2.
  • 1.3-inch I2C OLED display — 1.
  • DS1023-2X2 (PBD 4) connectors — 87.
  • DS-1023 1×3 (PBS-3) connectors — 4.
  • DS-1023 1×4 (PBS-4) connector — 1.
  • MTS-102-A2 on-on toggle switches — 2.
  • МКА-14103МS reed switch — 1.
  • TMB12A03 buzzer — 1.
  • GL5506 (4–7K) photoresistor — 1.
  • SI2300A MOSFET transistor — 1.
  • SS8550 PNP transistor — 1.
  • KPA-3010P3C IR phototransistor — 1.
  • AA-57*17 battery holders — 8.
  • DS-205 power socket — 1.
  • SS34 Schottky diodes — 2.
  • SPQ105-101M inductor — 1.
  • KP-2012SGC KGB/Green LED — 1.
  • Microphone module — 1.

Additional components

  • Enclosed Trackduino Pro board — 1.
  • Ultrasonic distance sensor — 1.
  • Gyroscope/accelerometer — 1.
  • DC motor — 1.
  • Servomotor — 1.
  • Infrared sensors — 2.
  • Soil moisture sensor — 1.
  • Weather sensor — 1.
  • 400-point breadboard — 1.
  • SS8050 transistors — 4.
  • 40-wire male-to-male, 20 cm cables — 1 set.
  • 40-wire female-to-male, 20 cm cables — 1 set.
  • Digital multimeter — 1.
  • Power adapter cables — 2.
  • MRT5 USB cable — 1.
  • AA-57*17 battery holders — 2.
  • Alligator-clip cables — 3.
  • Plastic construction elements: 24 mm pins — 10, 70 mm plastic shafts — 2, size 30 gear — 1, size 15 beam — 4.
  • 5RWWC white LEDs, 14,000 MCD, 6500 K, 3.4 V, 15D — 3.

Technical specifications

Enclosed Trackduino Pro board

  • Connects to a computer via USB or Bluetooth.
  • Built-in Bluetooth supports sending and receiving data and flashing the microcontroller.
  • Five programmable buttons, each connected to its own I/O port. Together with the RGB LED, these provide a basic human-machine interface without external devices.
  • MicroSD card slot for expanding non-volatile storage.
  • Power supply: 7–12 V. Two power connectors are provided: a jack for battery packs and a screw terminal for other 6–18 V sources.
  • Eight input ports with power (GND–Vin–S), each with a digital-to-analog converter; ports 1–4 support interrupts. Selectable supply voltage: 5 V/3 V.
  • Eight output ports with power; ports 1–5 provide hardware PWM for controlling third-party chips. Selectable supply voltage: 5 V/3 V.
  • Four DC motor ports driven by two L293 drivers with overcurrent protection.
  • Each motor channel uses two output ports to select rotation direction and braking, plus an additional PWM output to control speed.
  • Standard Arduino UNO R3 interface, independent of the other I/O ports, supports Arduino shields and libraries and adds 24 I/O connections for external devices.
  • RGB LED can be programmed to display approximately 16 million colors for visual indication of events or parameters.
  • Two exposed USART ports with power (RX, TX, 5 V, GND).
  • Two exposed I2C ports with power (SCL, SDA, 5 V, GND).
  • BOOT mode switch: RUN and DFU.
  • Processor: STM32F407 with 1 MB flash memory:
    • High-performance 32-bit Cortex-M4F microcontroller with floating-point DSP.
    • Up to 82 I/O ports.
    • Clock speed up to 168 MHz.
    • Flash program memory: 1 MB.
    • RAM: 196 KB.
    • Backup SRAM: 4 KB (EEPROM equivalent).
    • DSP instructions and floating-point support.
    • 16-bit timers: 2 basic, 8 general-purpose, 2 advanced, and 2 watchdog timers.
    • Two 32-bit general-purpose timers.
    • USB 2.0 full-speed device/host/OTG with on-chip PHY.
    • USB 2.0 high-speed/full-speed device/host/OTG with separate DMA and full-speed PHY; ULPI supported.
    • 10/100 Ethernet MAC with separate DMA and support for IEEE 1588v2, MII/RMII PHY interfaces.
    • Three SPI interfaces (37.5 Mbit/s); two are multiplexed with full-duplex I2S for high-quality audio.
    • Three I2C interfaces with SMBus/PMBus support.
    • Four USART and two UART interfaces, up to 10.5 Mbit/s; ISO 7816, LIN, IrDA, and modem control.
    • Two CAN 2.0B Active interfaces.
    • SDIO for SD cards.
    • DCMI 8–14-bit parallel camera interface (up to 54 MB/s).
    • Analog random-number generator.
    • Built-in CRC calculation unit.
    • 82 GPIO pins.
    • RTC (real-time clock).
    • Three 12-bit ADCs: 2.4 million samples per second, 16 channels, up to 7.2 million samples per second in triple-interleaved mode.
    • Two 12-bit DACs.
    • 16-channel DMA controller with FIFO and burst-transfer support.
    • Parallel LCD interface, 8080/6800 modes.
    • FSMC static-memory controller supporting CompactFlash, SRAM, PSRAM, NOR, and NAND.
    • JTAG or SW debugging.
    • Operating temperature: −45°C to +85°C.

Ultrasonic distance sensor

  • Model: HC-SR04.
  • Supply voltage: 5.0 V.
  • Operating current: 15 mA.
  • Operating frequency: 40 kHz.
  • Operating angle: 15°.
  • Minimum measuring distance: 2 cm.
  • Maximum measuring distance: 300 cm.

Accelerometer and gyroscope

  • Model: MPU-6050.
  • Supply voltage: 3.3–5.0 V.
  • Operating current: less than 5 mA.
  • Accelerometer ranges: ±2g, ±4g, ±8g, ±16g.
  • Gyroscope angular velocity ranges: ±250, 500, 1000, 2000°/s.
  • Number of axes: 3.
  • Connection interface: 4-wire I2C.

DC motor

  • Control: automatic phase adjustment.
  • Operating voltage: 5.5–9 V.
  • Operating temperature: −20°C to 60°C.
  • Speed: 270 rpm at 9 V.
  • Torque: 2.7 kgf·cm ±15% at 5.5 V / 3.5 kgf·cm ±15% at 9 V.
  • Operating angle: 360°.
  • Operating current: 80–110 mA.
  • Connector cable length: 240 mm.

Servomotor

  • Operating voltage: 3.7–6 V.
  • Rotation range: 180°.
  • Speed: 0.13 s per 60°.
  • Load current: 600 mA at 6 V.
  • Torque: 10.6 kg·cm at 6.0 V.

Infrared sensor

  • Material: GaAsP/GaAlInP (gallium arsenide phosphide / gallium aluminum indium phosphide).
  • Lens type: “water”.
  • Maximum operating range specified at Ta = 25°C.
  • Voltage range: 1.1–1.5 V.
  • Operating temperature: −40°C to +85°C.
  • Peak wavelength: 940 nm.
  • Maximum current consumption: 10 μA.

The kit includes a digital teaching and learning package at no extra charge (provided after a network cooperation agreement is signed). It also includes access to Robotrack IDE, online teacher training, and technical support.