How to use the algorithms

What are the algorithms for?

These algorithms were developed for Robotrack projects that use a Trackduino microcontroller, the Sensors or Malysh Project resource kit, a TFT LCD touchscreen display, and a temperature sensor. To use an algorithm, choose a project, select its sensors and actuators, assemble the robot model, and upload the program to the Trackduino board. You can edit the algorithm if needed.

Each algorithm includes a short project description. Children assemble the model by following it, and the teacher uploads the program to the microcontroller. Follow the instructions below.

Where can I download and install the software?

  1. Download Robotrack IDE 1.3.1 for Windows x86/x64.
  2. Follow the link and save the file to your computer.
  1. Find robotrack-windows in the Downloads folder and run it.
  2. Follow the installation wizard.
  1. If you do not want to launch the program immediately after installation, clear Launch Robotrack.

How do I connect the board to a computer?

  1. Take the USB cable from the kit.
  2. Find the USB connector on the board.
  3. Connect the board to the computer with the cable.

Where can I download the algorithms?

  1. Download the sto_zadach.rar archive.
  2. Extract it to your working folder.

How do I launch the software and upload an algorithm?

  1. Double-click the Robotrack shortcut on the desktop.
  1. In the window that opens, check that the correct board is selected.
  1. Click the file-open button to choose an algorithm to upload.
  2. Select the required algorithm from the list and double-click it.
  3. Click the code-generation button.
  4. Save the generated code to a temporary folder.

How do I use the algorithms?

Algorithms are grouped by sensors and actuators. The complete algorithm list and program archive help you choose a project and assemble a model. Each algorithm document describes how it works.

When working with an algorithm:

  1. Select the required sensors and actuators.
  2. Read the description carefully.
  3. Use the flowchart to discuss the program sequence with the children.
  4. Assemble a robotic model using construction kits from the Robotrack for preschool education, Robotrack for general education, or Robotrack for high school and university lines.
  5. Connect sensors and actuators to the ports specified in the program.
  6. Open the program in Robotrack IDE and upload it to the Trackduino board.
  7. Test the assembled model.
  8. Modify the program and repeat the test if needed.