In preschool education, Robotrack kits introduce the basics of construction and modelling through play. At ages 5–7, children build and model structures while developing motor skills, memory, attention and spatial thinking. Preparatory groups can take part in practical introductory robotics lessons.
Robotrack Malysh-1 robotics kit
The kit contains at least 277 components
- Plastic beams (5 types) and blocks (10 types) in different shapes for building structures.
- Wheels (4 types), gears (3 types), and a gear wheel.
- Plastic shafts (4 types), plastic bushings (2 types), plastic and rubber couplings, flat plastic frames (3 types), platforms, rubber plates, eyes, brackets, levers, and arcs.
- Two controller boards: a beginner-level non-programmable controller with built-in programs and the multifunctional Trackduino controller.
- Two DC motors.
- A set of two types of sensors: two IR sensors and two touch sensors.
- One USB cable for the Trackduino controller.
- Two battery holders for AA batteries (6 V and 9 V).
- A disassembly key.
- Software and installation instructions.
The kit includes a digital teaching and learning package at no extra charge (provided after a network cooperation agreement is signed). It also includes access to Robotrack IDE and TrackyCode, online teacher training, and technical support.
Parts list: Download malysh1_230924.pdf.
Robotrack Malysh-2 kit for mathematics, algorithms, and introductory programming
The kit contains at least 302 components
- Plastic beams (5 types) and blocks (10 types) in different shapes for building structures.
- Wheels (4 types), gears (3 types), and a gear wheel.
- Plastic shafts (4 types), plastic bushings (2 types), plastic and rubber couplings, flat plastic frames (3 types), platforms, rubber plates, eyes, brackets, levers, and arcs.
- Two controller boards: a programmable beginner-level controller and the multifunctional Trackduino controller.
- Two DC motors.
- A set of three types of sensors: two IR sensors, one remote-control sensor, and one sound sensor.
- One USB cable for the Trackduino controller.
- Two battery holders for AA batteries (6 V and 9 V).
- A disassembly key.
- One remote control.
- Software and installation instructions.
The kit can also be supplied with a servomotor.
The software provides a visual programming language interface with a graphics editor, code blocks, and tools for creating sprites and backgrounds, similar to Scratch. It has two modes: uploading a program to the controller and controlling a programmable controller in a visual, block-based, event-driven environment. The software supports learning the fundamentals of programming in this environment.
The kit includes a digital teaching and learning package at no extra charge (provided after a network cooperation agreement is signed). It also includes access to Robotrack IDE, TrackyCode, and Robotrack PDU, online teacher training, and technical support.
Parts list: Download malysh2_230924.pdf.
Robotrack Malysh Project robotics kit
The kit contains at least 29 components
- One servomotor.
- Two servomotor frames.
- Two motor frames.
- Three infrared sensors.
- One light sensor.
- One remote-control receiver sensor.
- Two touch sensors.
- One speaker.
- One piezo emitter.
- One sound sensor.
- Three tilt sensors.
- One vibration sensor.
- One fire sensor.
- Two magnetic field sensors.
- One color and light sensor.
- One ultrasonic distance sensor.
- LED modules in three colors.
- Two types of servo horns.
Parts list: Download malysh-proekt.pdf.
Electronics for Young Geniuses: a play-based kit for learning the fundamentals of electricity and electronics
Components inside the workbench
- 1 × 100 Ω resistor.
- 6 × 220 Ω resistors.
- 4 × 1 kΩ resistors.
- 1 × 10 kΩ resistor.
- 1 × 50 kΩ resistor.
- 2 × 100 kΩ resistors.
- 2 × 470 kΩ resistors.
- 2 × 0.1 μF ceramic capacitors.
- 2 × 0.022 μF ceramic capacitors.
- 2 × 0.047 μF ceramic capacitors.
- 2 × 470 μF electrolytic capacitors.
- 1 × 100 μF electrolytic capacitor.
- 2 PNP transistors.
- 2 NPN transistors.
- One each of the following 5 mm LEDs: red, yellow, green, blue, and white.
- One 5 mm RGB LED.
- One reed switch.
- 2 × 20 kΩ potentiometers.
- 1 × 50 kΩ potentiometer.
- One photoresistor.
- One breadboard.
- One piezo emitter.
Additional components in the educational kit
- One hand-cranked generator (DC motor).
- One solar panel.
- One set of male-to-male jumper wires.
- One set of male-to-female jumper wires.
- One compass.
- Two bar magnets.
- One electromagnet.
- One two-lead inductor coil.
- One three-lead inductor coil.
- One copper rod with a wire.
- One zinc rod with a wire.
- Three copper and zinc rods connected by a wire.
- Three tactile push buttons.
- Two slide switches.
- Two 50 cm cords.
- One each of the following 5 mm LEDs: red, yellow, green, blue, and white.
The kit includes a digital teaching and learning package at no extra charge (provided after a network cooperation agreement is signed), online teacher training, and technical support.
Parts list: Download part_-_list_ehlektronika_dlja_junyx_geniev.pdf.
NeuroTrack resource kit
The kit includes
- One neuroheadband.
- One micro-USB charging cable.
- A link to the software and instructions.
Neuroheadband specifications
- Sampling rate: 512 Hz.
- Frequency range: 3–100 Hz.
- Maximum power consumption: 15 mA at 3.3 V; operating voltage: 2.97–3.63 V.
- UART (COM): 9600 baud.
- Bluetooth version: 2.1.
- Bluetooth range: up to 10 m.
- Bluetooth power consumption: 80 mA while connected and transmitting.
The kit includes a digital teaching and learning package at no extra charge (provided after a network cooperation agreement is signed). It also includes access to Robotrack IDE, online teacher training, and technical support.
Yandex Alice smart remote control and additional sensors

